Archive for the ‘grasshopper’ Category
Michal Piasecki worked for WWAA on Polish Pavilion for ITU telecom 2011 fair in Geneva. WWAA design team is Marcin Mostafa, Natalia Paszkowska, Boris Kudlicka and Maciej Burdalski. Michal was responsible for parametric modeling. The design was commissioned by Polish Ministry of Infrastructure and 7 Polish telecommunication companies. The three-dimensional structure hanged above the pavilion imitates [...]
Filed under: 02 consulting, 05 programming, scripting, parametric modeling, 08 exhibitions, CNC milling, creative coding, digital fabrication, grasshopper, WWAA | 1 Comment
Tags: Boris Kudlicka, ITU, ITU Pavilion, Marcin Mostafa, Michal Piasecki, Natalia Paszkowska, WWAA
Super Super: Przemiany Festiwal
Super Super worked with Michal Piasecki on a set design for Przemiany Festiwal, taking place between 1st and 4th of September at Centrum Nauki Kopernik in Warsaw. The project team is: Hanna Kokczynska, Jacek Majewski, Michal Piasecki and Ignacy Kaim. Jakub Skladanek was the production manager. Dedicated algorithm is used to close pack circles and [...]
Filed under: 02 consulting, 05 programming, scripting, parametric modeling, creative coding, grasshopper, parametric modeling, Rhinoscripting, Super Super | Leave a Comment
Tags: Centrum Nauki Kopernik, circle close packing, close packing, Festiwal Przemiany, Hanna Kokczyńska, Jacek Majewski, Michal Piasecki, Super Super
Michal Piasecki worked for Joris Laarman Lab on Digital Matter. The project was commissioned by High Museum of Art in Atlanta for Modern by Design exhibition, taking place between June 4 and August 21, 2011. Digital Matter was inspired by development of digital nanomaterials, parallel to rapid innovations in computer graphics. An approximation of a [...]
Filed under: 02 consulting, 05 programming, scripting, parametric modeling, 08 exhibitions, creative coding, digital fabrication, Digital Matter, grasshopper, Joris Laarman Lab | 1 Comment
Tags: Atlanta, Digital Matter, Grasshopper, High Museum of Art, Joris Laarman Lab, Michal Piasecki, Rhino, voxel
137kilo: Green Corner
Michal Piasecki worked with 137kilo on a concept design for an entrance hall in Green Corner – a new office building in Warsaw. Parametric model of the furniture in the hall is an assembly of cross sections derived from ergonomic studies of various sitting positions. The model was developed in Grasshopper. Two sample models were [...]
Filed under: 01 design, 02 consulting, 05 programming, scripting, parametric modeling, CNC milling, digital fabrication, grasshopper, parametric modeling | 1 Comment
Tags: 137 kilo, Anna Zawadzka, Green Corner, Janek Sukiennik, Michal Piasecki, Mikołaj Molenda, Wojtek Gajewski, Zofia Strumiłło
NEX Architecture: To + Fro Table
Michal recently joined NEX Architecture, where he is responsible for parametric modeling and generative processes. First project he was involved with is To + Fro Table, which went on display at London Design Festival (The Dock, September 20-26, 2010) and Frieze Art Fair (The House of The Noble Man, October 14-20, 2010). Below is a [...]
Filed under: 01 design, 02 consulting, 05 programming, scripting, parametric modeling, CNC milling, digital fabrication, grasshopper, NEX, Rhinoscripting, To + Fro Table | 3 Comments
Tags: Alan Dempsey, Friexe Art Fair, London Design Festival, Michal Piasecki, NEX, NEX Architecture, Paul Loh, To + Fro Table
File 2 Factory Continuum workshops are a result of cooperation between a couple of European architectural schools and industry partners. The Bartlett and TU Delft are among the collaborators. Sean Hanna was the facilitator of the workshop from the side of The Bartlett. The first workshop from the series took place in Lyon in September [...]
Filed under: 01 design, digital fabrication, file 2 factory, grasshopper, workshops | Leave a Comment
Tags: F2F Continuum, Ramon Sastre
“grasshopper primer”
I have learned through Andrea Graziano blog that LIFT architects wrote “The Grashopper Primer” – a step by step introduction on how to use Grasshopper. Basically, Grasshopper Primer is a collection of tutorials available on the web – gathered in one pdf and organized depending on the level of difficulty. It’s available under CC from [...]
Filed under: creative commons, generative design, grasshopper | Leave a Comment
Tags: Michal Piasecki
